RZR XP 1000 WORCS or GBC Short Course

ID# 182022Posted Nov 17
For_sale $11,500
2016 Polaris RZR XP 1000 XP 1000

2016 xp 1000 set up for WORCS or GBC Short Course, full HOLZ racing shortcourse kit, steering quickner, custom nerf bars, MCR tune, sparks clutch tune and exhaust, lots of extra parts, only raced for 2.5 seasons, only thing you need to start racing is shock set up (current shocks are off a stock car). Comes with almost new GBC tires and WER bead lock wheels.

2020 Polaris RS1 Carr One

ID# 182020Posted Nov 17
For_sale $38,000
2020 Polaris  RS1

Chassis has been fully gusseted and all pivot points have chromoly weld washers, all pivot point bolts have been upgraded from 10.9 to 12.9 aircraft grade fasteners

Elka Stage 5 shocks set up for WORCs racing
ZBros rear sway bar
Hostyle sfi rated safety nets
Sparco seat
Impact Cam lock 5 point harness
Parker pumper extreme air pumper
Kenwood 50w radio w/ y harness and steering wheel button
Hess Motorsports steering quickener
Hess Motorsports steering wheel
Hess Motorsports steering quick release
Hess Motors. powersteering reset switch
AIM Sports dash display
Carr One Cage
Carr One front/rear bumpers
Carr One nerf bars
Carr One Aluminum panels
Carr One A-arms
Carr One Trailing arms
CMi radius rods
CMi tie rods
Cutting Edge billet chromoly front Spindles
ZRP rear carrier bearing assemblies
CMi chromoly hubs w/ arp studs
Super ATV Rhino 2.0 axles
Super ATV Rhino drive shaft w/ billet carrier
Hess Motorsports billet Engine/Trans mount
Hess Motorsports billet engine cross bar
Custom battery mount for lithium Antigravity battery
Antigravity battery ytx-24
7/8” brake master cylinder for better braking
Factory UTV full length skid plate
Billet fire extinguisher mount w/ ABC fire extinguisher

Engine is fresh TPR build
TPR valve cover w/ msd coils
TPR cam chain tensioner
Turbo head cnc ported w/ oversized valves
BC stroker crank
BC rods
BC high comp pistons
BC high lift cam w/ valve springs
BC DLC coated buckets
ARP head studs
ARP lower case studs
XP turbo oil pan (modified)
Injector dynamics over sized injectors
Billet aluminum throttle body mount
CMi air filter w/ throttle body adapter
CMi full exhaust
PowerVision tuner included

All gears have been machined to reduce weight and everything internally is polished
Low gear deleted
Park deleted
Koyo bearings
Chromoly snap ring delete
Chromoly retainer plate w/ arp bolts

Stock w/ adjustable fly weights
Trinity belt

Front diff:
All gears are polished
Sandcraft billet torsion retainer
Sandcraft billet armature plate

Comes with 8 method wheels and 8 GBC terra master tires that are grooved to reduce weight.

Spare parts:
2 spare trinity cvt belts
Complete set of Carr One A-arms
CMi Radius rods
Rhino 2.0 axles
CMi air filter
1 CMi wheel hub with rotor and ARP studs
Stock complete set of Walker Evans shocks
Complete set of grade 12.9 pivot point bolts

Price is obo
I can also do $32,000 but will come with stock engine, stock exhaust, stock injectors, stock trans, stock shocks, stock ecu tune

2017 Polaris RZR XP 1000 - Gold Metallic Rocks and Trails Edition

ID# 181995Posted Nov 16
For_sale $23,500
2017 Polaris XP1000 TRE

2017 Polaris RZR XP 1000 SE - Gold Metallic Rocks and Trails Edition
Race Car - Play Car

• Cage Wrx Super Shorty Cage
• Cage Wrx Roof
• Cage Wrx Front Bumper
• Factory UTV Skid plate
• 2 Extinguishers with brackets
• PRP Belts
• PRP GT/SE Heated Seats
• PRP Full Metal doors
• PRP Mesh Window Nets
• PRP door bags
• Rugged Radios Comms - Radio (50 Watt) and Intercom (660) w/ Active Filter
• PCI Pumper w/ Hoses
• Assault Tomahawk steering wheel with quick disconnect
• Spring Brake Thingy (Emergency Brake)
• Assault Bomber Side Mirrors
• Assault rear bumper
• Assault spare tire carrier w/ Strap
• Aluminum Bed Storage Box
• Viper 4500lb winch. Dashboard hard wired
• 2 Battery System - Odyssey and Aux AGM battery
• Functioning XPT Hood
• Baja Designs XL Pro Lights
• Lazer Star Rear Chase Light
• HCT Exhaust and Stage 3 Tune
• Arisun Aftershock 32" Tires mounted on KMC Machete Bead locks
• Cage Wrx Front Sway bar
• Sandcraft Drive line with carrier bearing
• Cage Wrx Spindles
• Hess Billet Hubs w/ 300mm studs
• HCR Elite Suspension - OEM width
• Fox RC Shocks 2 ½” Front and 3” Rear Rebuilt and Tuned by Desert Speed Shock Tuning
• Assault Tie Rods
• Eibach Rear Sway Bar
• Assault Sway Bar Links
• Rhino 2.0 Axles
• HD Extreme Offroad - Stage 3 Diff
• Hunterworks Secondary
• New OEM Helix
• Dalton Clutch
• AIM Belt Gauge
• Desertcraft Quick Draw Race Kit

New Parts
• New fuel system - All new OEM parts- Injectors, Fuel Pump, Air Box Seal, Mass Air Flow Sensor, New O2 sensor
• 2 - Rear Axles Rhino 2.0
• Rear bearings
• Rear brake pads
• Trinity Belt
• New SB Air Filter
• Fresh Oils

• Spare axles
• 5 spare tires Arisun AfterShock 32"
• Spare hubs and Rotors
• Lowrance HDS5 GPS (Not installed)

Raced the last two seasons on the Bonneville Off Road Sportsman - Two seconds, One third, One Fourth. Only one DNF.

2787 mi
185.3 Hr
$23,500 Make a reasonable offer
Well taken care of and maintained. Garage kept. Lots of new parts. Ready to go.

2016 Polaris ACE 900 SP

ID# 181978Posted Nov 16
For_sale $8,500

Up for sale is my 2016 Ace 900 SP. This is the power steering model with the same 900 engine as the 2 and 4 seat cars.
Low miles and low hours.
IMG Motorsports custom built roll cage with aluminum roof.
I put a better seat in it with 4 point belts.
This car is a rocket ship! Super fun in the dunes. I will include a full set of paddles with wheels as well.
Very well maintained and I will include an extra belt.
8500 or best offer! Clean title ready to go!

2017 Can-Am X3 Pro Turbo BITD Legal

ID# 181931Posted Nov 15
For_sale $69,000
2017 Can-Am X3

2017 Can Am X3
BITD Legal
Custom Build Cage and chassis
Custom Dash
Hostyle Custom window nets
Mob arrmor 12” Ipad mount on dash
EVO stage 3 tune (Runs on pump gas)
Switch Pro
Rugged Radio
Rugged fresh air pumpers
Back Up Camera
Sparco Seats and Belts
MPI Wheel
Pyro Tech 32g Cell
Dry Brake up front
2020 innercooler
CNR Radiator
4 brand new RCV axles
Halo Diff with 33 spline side gears. ( Bullet proof )
S3 Power Sports Arms and trailing arms
E2R rear sway bar and links
Hess Steering rack brace
Keller ball joints
Wilwood big brakes and rotors
Fox Body shocks build by Gforce and NOST. With Pumpers. Self adjusting. shocks may or may not go with car.
8 KMC wheels 15x6.5
5 Brand new ITP Tenacity 33x9.5 tires
CT Race works chromaoly rear radius rods.
Tray Co Jack.
Factory UTV Skid Plates
2018 Air Dam Clutch's
Baja Design 8” bar in bumper and XL 80 on A piller
Baja Design Rear light bar

Would consider trade for Ford Super Duty.
This car is prepped and ready to race.
You cant build one for less.
Car is currently located in Maine.
My price includes delivery to any of the lower 48 states.

Polaris xp1000

ID# 181933Posted Nov 15
For_sale $42,000
2015 Polaris  Xp1000

2015 Polaris xp1000 for sale. Business got in the way of racing and don’t want the car to sit

New motor
New transmission from cryo-heat
Turner axles
New 401r with tensor 32” DS
Car to car radio
Elite ti GPS
All new seats, window nets and harnesses up to date
J arm front end
Full tube chassis
Clutch fan
Howe steering rack
100w siren
Sand craft front diff and carrier bearing
Pyrotech fuel cell- just cleaned.
Aeromotive fuel pump with regulator
Oil cooler - not installed yet
Clean tin work all around - no wrap
Car does run just needs exhaust installed.
Has been dyno’d and tuned by Muzzy’s performance

Call with any questions.

2015 Polaris XP1000 Race Ready

ID# 180564Posted Nov 15
For_sale $25,000
2015 Polaris XP1000

Built by Miller Motorsports and raced by Erik Miller at King of the Hammers.

2017 Rocks and Trails front differential and transmission for Turbo axles.
Sandcraft RCR BulletProof Front Differential Kit
Rhino 2.0 Turbo Axle Shafts
FOX Internal Bypass Race Shocks – Custom Bypass Port Layout and Valving
PAC Racing Springs (3.0 &3.75)
PAC Racing AL Spring Sliders
PAC Racing Rear RZR Tomahawk Sway Bar Kit 35 spl x 1.250 AD
Fuzion Hell RzR KOH Complete Suspension System
SATV billet radius arms
Factory UTV Custom UHMW Skid Plates with 6061 AL backing plate and 4130 Weld in rear belly pan
HD Prop Shafts and Billet Carrier Bearing
Keller Ball Joints
Warn ProVantage 4500-S Winch & Mounting Kit (Custom remote disconnect)
32” BF Goodrich KM3 tires – 5 used and 2 new
32” Tensor D/S Race Tires (3)
Method 401-R Race Beadlocks (5)
Vision Race Beadlocks (2)
Rugged Radios – Icom Radio and 6100 Intercom, Dual Pumper air
Lowrance Elite Ti7 touchscreen GPS
Miller Motorsports Custom Built 4130 Lightweight Race Cage with Roof
Sparco Corsa Racing Seats and Impact seat belts
Dragonfire Racing Steering Wheel and Disconnect
FuelSafe 12 gallon Racing Cell w/new OEM Fuel Pump and Pickup Assembly w/Baffling and Collector
FuelSafe Redhead
UMP Air Intake
Custom Door Bars and Window Nets
Custom Boatside chassis for maximum rock clearance
Alba Belt Blower System with Temp Gauge
Alba Custom Tuned ECU
Dirty Dawg Clutch Kit
SATV HD Steering Rack and HD Tie Rod Kit
SATV HD Aluminum Radiator
ARP Wheel Studs
Miller Motorsports Custom 4130 Chassis Pivot and Gusset Kit
Art Carr Gated Shifter custom fitted for RZR
Rear LED Tail Light Bar
Custom Rear Bumper with Spare Tire and Scissor Jack Mount
SATV Front Bumper
Custom under seat tool storage compartment
Total Power TP1200 Racing Batter and Mount with Disconnect
Race Rear View Mirror
Fire Extinguishers with Quick Disconnect Mounts
HMF Exhaust (Stock dB tone)
Spare A Arms, Radius Arms, and Trailing Arms (used)
Clutch tools

Can-Am X3 (Full Custom / Chromoly Chassis)

ID# 179799Posted Nov 14
For_sale $115,000
0 Can-Am X3

Can-AM X3 SCORE / BITD Legal

Glazzkraft Fab Division full gig welded chromoly chassis.
Retains all factory pivot points of X3 MAX. Pro Production Turbo Legal

Rotax ACE 900cc Turbo
Evo Charge Tubes
Evo Stage 3R Tune

Fortin UTV Hydraulic Power Steering
Fortin Front Differential
Fortin Spray
Fortin Custom Driveshafts
Fortin High Amp Alternator
KWI High Speed Rear Gears
KWI Full Clutching with Float Mod
Dual Wilwood Master Cylinder

Pyrotect 35gal. Fuel Cell
Redhead Female Dry Break
External Discriminator Valve
Dual Weldon Fuel Pumps

CBR Performance UTV Radiator
Dual Fans

Custom by Glazzkraft Fab Division

Fifty6 Industries 72” Chromoly Tig Welded Kit
FK Heims / Uniballs
Class 10.9 Hardware
Custom Tuned Fox Shocks
Eibach Springs
Summers Brothers Front / Rear Sway Bars

Wheels / Tires:
Method 401-R 15x5
Tensor 33” DSR

Baja Designs LP6 Front Lights
Baja Designs RTL 30”
KC Dome Lights
Custom Glazzkraft Tail Lights

Impact Genesys Seats
Mastercraft 5pt Harnesses
Impact Steering Wheel w/ Quick Release
Glazzkraft Carbon Fiber Dash
Lowrence HDS 7”
Lowrence HDS 10”
AEM Digital Gauge Cluster
PCI Intercom / Radio
PCI Race Air
Razorback Belt Temp Gauge
Switch Pros 12
Wiring By: Chulo Castelan / Castelan Race Prep

Glazzkraft Carbon Fiber / Fiberglass X3 Race Body
Custom Paint / Pin Stripe by Glazzkraft

For Sale Car Only


This car its a head turner, no expense spared! Tensor Tire Feature vehicle, truly one of a kind!

I have more photos if interested, just reach out to me.

Adam Castaneda 928-259-9854 English
Jose Carlos Bustamante 928-919-1878 Español


ID# 181635Posted Nov 13
For_sale $90,000
2021 Can Am Maverick X3

Brand new-Never driven-Just finished
If you are serious about Glamis, pre run or just fun? and want to stand out above the others.
Why wait 6 months to get your Can Am built and find out you may not even get parts by then.
Everything added to this car was built for safety and toughness in mind.
So much in this car it is ridiculous to try and explain, but I will try and give you a run down.

• Aluminum roof and doors, hydraulic door openers and new aluminum handles
• All KC LED lights. Rack, driving, spot, rear amber, and even interior dome KC’s
• Roll bar, Custom spare carrier with 3 point rachet for spare tire
• 2 fire extinguishers with quick disconnect, horn, grill, window diffuser
• 2 tool bags full of new tools and parts you need for quick belt change or repair
• Jack, quick disconnect belt cover, extra HD belt, recovery strap
• Cat delete and 3 inch full exhaust, Particle separator, HD axles
• Shock therapy springs rated for cars set up
• Trailing arms, radius rods, sheer kit and radius plate, front arms, sway bar links, tie rods, ball
joints, aluminum large brake and gas pedal
• Front bumper, skid plate, front gussets, bulk head, shock tower, limit straps front and rear
• PRP Seats , 5-point 3 inch harnesses, adjustable 4-person race air
• Steering wheel with quick disconnect, Side mirrors
• 35 inch tires with real bead locks
• Kenwood race radio, push to talk communication, outlet for music connection, touch
screen GPS Elite FS 7
• 2 batteries with 3 position battery on/off switch, battery jump start relocation kit
• Everything has its own switches
• Over 250 ft of wiring added for new accessories.
• All new accessories protected by 15 fuses on fuse block.
• 4 New PCI wired and top air helmets, 4 neck collars and 4 zipper helmet bags.

Plus much more. Like I said, its done and built to be safe and strong
If you know these machines then you will be impressed.
If you want one of the best built and looking cars out there then come see it...

2022 Speed UTV - Master #1452- El Diablo

ID# 181848Posted Nov 12
For_sale $8,100
2022 Speed 

Looking to sell my 2022 Speed UTV, going a different route for racing. I ordered it 07/2020 so the price is locked at $30,000 and comes with the $ 1 Speed Key vs paying $1250 for it.

Added accessories:
Speed Key
Pyrotect Fuel Cell
PCI Radio and Intercom Kit
Extra Factory wheel and tire
Break in Kit

I'm sure you can call to add more if you desire.

Asking $8100 cost of accessories and down payment
Remaining balance to Speed $29,501

If you were to buy now it would cost you $34,999 for the UTV plus $1250 for Speed Key. Also, only $1500 for deposit vs paying $3000.