ID# 176559Posted May 18
2014 Chevrolet Silverado 3500hd
2014 3500hd lml Duramax Allison trans SRW Crew Cab lt 206k miles
-fox 2.0 w/res up front
-method black rims
-Brand new 35inch tires
-rear sumo springs bump stops for extra payload if needed
-rear end freshly rebuilt with Eaton Detroit Truetrac installed
-in dash Kenwood with 2-12" subs under rear seat
-efilive tuning by Kory Willis
-ezlynk (I can transfer all tunes and files to new owner)
-dpf delete (still have all stock parts)
-grid heater delete / throttle blade
-pusher charge pipes
- ppe down pipe
-4 inch exhaust
-fleece proflow in tank lift pump
-new thermostats and coolant flush
-new oil cooler/filter housing
-brakes have roughly 80% life left
-trans and transfer case fluid always serviced and just serviced with transynd fluid
-all 5 windows tinted
-2015 rear bumper
-dmax store heavy duty tie rods
-new upper control arms and lower ball joints
I'm sure I missed items. Truck runs and drives amazing. Reason I'm selling it I drive roughly 90 miles a day so bought an eco car.
Asking 30,000 obo text or call 949.614.9612
ID# 176542Posted May 18
2021 Jeep Gladiator
65626 - 2020 Jeep Wrangler Unlimited Rubicon - $64,995
65482 - 2018 Jeep Wrangler Unlimited Rubicon - $56,800
65657 - 2018 Jeep Wrangler Unlimited Rubicon - $63,995
65609 - 2017 Jeep Wrangler Unlimited Sahara- $41,995
65458 - 2014 Jeep Compass Limited- $14,450
65590 - 2016 Jeep Patriot Latitude- $14,700
ID# 176535Posted May 17
2017 Ford F250
Angry Iron Metalworks is pleased to offer our 2017 Ford F-250 Super Duty Lariat for sale. It was built at our shop in Northeast Georgia to showcase our products to our customers. Products displayed on the truck include custom front and rear bumpers, side steps and a roof rack system. A spare tire mount, capable of holding a 40” inch tire was also installed, but made to be removable, should the new owner desire to use the full length bed.
It has a top of the line 4.5” Carli Pin Top suspension system consisting of King shocks, progressive rate coils and deaver rear springs, giving the truck the ability to run the toughest trails, jump the dunes and commute to work on Monday.
Rolling stock is a set of four 37x13.50R20 Nitto Ridge Grapplers, wrapped around Black Rhino wheels. A matching, full-sized spare wheel and tire, mounted in the bed, are included in the sale.
Front and rear, we loaded our custom bumpers with Rigid Industries DOT approved fog lights and back up lights. Additionally, a total of seven light bars have been placed around the vehicle to complete the lighting system, which can easily light up a job site, just as easily as it can light up a camp site. Replacing the factory units and complementing the Rigid products, we have installed Anzo headlights and tail lights, rounding out the lighting package, can you tell we like cool lights, factory cab lights were replaced with blacked out Recon units.
To protect the bed for work or play, a Ford truck bed mat and tailgate cover were used instead of a spray in liner and Husky floor mats protect the like new carpet in the cab. This vehicle has been well thought out and can be further customized for the right client. Serious inquiries only please, from qualified buyers. 13,380 miles. Over $110K invested, $82K OBO. Please contact Angy Iron Metalworks owner and builder, Matt Thomason for further details. Phone: 706-244-5153.
ID# 176514Posted May 16
2017 Ford Raptor
Ford Raptor F150
802A loaded, sunroof etc
The truck is in pristine condition, and was built with no expense spared; this isn't your typical raptor that most people modify to go overlanding, this is a full blown chase truck build-built by Brenthel Industries in Temecula. The quality of the build and fabrication would cost $100k to replicate in parts + labor excluding the cost of the truck. Currently only 24k miles.
The car currently has F150 platinum seats, it initially had Sparco race seats but they were replaced.
The following upgrades were made to the truck, all built by Brenthel in Temecula:
Baja Kits 3.0 Raptor 4wd Race Kit
-King 3.0 raptor specific coilovers
-King 3.0 raptor specific bypasses up front
-King 2.0 air bumps up front
-Baja kits boxed UCA with Uniball- Full heims
-Baja kits boxed LCA with Full heims
-Baja kits Gusseted spindles
-Deaver race pack leafs
-King 2.5" air bumps
-King 3.0 rear reservoir bypasses
-Method 105 17" beadlocks
-Basically new BFG MT's; stock size, 35x12.5x17
-Alcon big brake kits FRONT AND REAR
-Whipple performance CAI with Tune, +200lb ft of torque
-Cat back exhaust, stainless mufflers with turn-downs in front of the rear axle.
-Full carbon fiber front fenders and bedsides, wrapped in matte black. Paint underneath is glossy and in good shape.
-Custom red/black metallic paint job
-Rear tire cage with Pro-eagle; carries two spares
-Full dynamat interior all around
-Full DOM roll cage, wrapped in alcantara to match the interior.
-F150 Platinum front seats (Heated, cooled and massaging)
-ADD Off Road front and rear bumpers and rock sliders
-Baja Designs ONx6 Light bar in front bumper
-4x Baja Designs LP9's up front
-2x Baja Designs XL ditch lights with brackets
-full metal skid belly plate
-Rear mounted Baja designs lights
-CB radio + megaphone & police sirens.
-Built in air-compressor
-Fully equipped with Lowrance HDS multifunction GPS, X2
one 16” lowrance HDS mounted on passenger side. one lowrance HDS 7 mounted on center cage
-5 ton heavy duty off-road jack mounted to bed cage
-2 full spares mounted in bed cage
-3 fire extinguishers mounted throughout entire car, front, center, and rear bed
Over $100k invested into the entire build.
ID# 176477Posted May 14
2008 Ford F350 4X4
6.4 liter 4X4 POWERSTROKE DIESEL F350 Superduty Lariat Crew Cab Chase
Power leather seats.
Seats 3 in front and 3 in back.
Power adjustable pedals.
HOT HEAT AND ICE COLD A/C.
275/70/R18 BFG All Terrain tires with plenty of tread ON FACTORY WHEELS.
12v to 110v converter with tailgate electrical sockets.
Rear work lights.
Tow Command System.
Airbag suspension and ride control.
Rear camera ready (not included)
Tire chase rack will accommodate up to 40" tires.
Mounted bed jack.
Onboard nitrogen tank.
Onboard fire extinguisher
Transferflow 50 gallon diesel tank
Transferflow 50 gallon gasoline tank
LineX spray liner truck bed and bumper.
Viair compressor and large undercarriage tank.
ICOM programmable race radio with digital upgrade.
5 SPD AUTO TRANS
Lowrance HDS5M GPS.
ID# 176444Posted May 12
1985 Chevrolet K10
This 1985 Chevrolet K10 Silverado was acquired by the seller in 2009, and it was subsequently refurbished and modified. The exterior was refinished in black, the bench seat was reupholstered with tan cloth, and an LQ9 Vortec V8 stroked to 6.2 liters and fitted with a Procharger supercharger was installed. Additional modifications include a new three-speed automatic transmission, a New Process dual-range transfer case, limited-slip differentials, a custom dual-exhaust system, a lift kit, methanol injection, 15″ Weld wheels with 35″ tires, and a Pioneer CD stereo with aftermarket speakers and amplifiers. Recent service included an oil change and replacement of the spark plugs.
The exterior is finished in black and features chrome trim, aftermarket front turn signals, a tinted rear window, and a receiver hitch.
Forged 15″ Weld Mountain Crusher wheels wear 35″ Interco TrXus M/T tires. The suspension is equipped with a Rancho steering stabilizer and dampers, and has been lifted with modified springs and 1″ blocks.
The cabin features a bench seat reupholstered in tan patterned cloth, along with matching carpets protected by aftermarket floor mats. Amenities include a B&M shifter, power windows, map pockets, and a Pioneer CD stereo hooked to amplifiers and subwoofers mounted behind the seat and speakers mounted in the doors. The dashboard was recovered in vinyl, a replacement headliner was installed, and Dynamat sound dampening material has been applied under the carpet.
The four-spoke steering wheel frames AutoMeter instrumentation including a 160-mph speedometer, 10k-rpm tachometer, auxiliary gauges, and a column-mounted boost gauge. The five-digit mechanical odometer shows under 4k miles.
The fuel-injected LQ9 Vortec V8 sourced from a GMC Denali is said to have been stroked to 6.2 liters and is equipped with the following components:
Snow Performance methanol injection
Aeromotive fuel pump and fuel pressure regulator
Comp Cams camshaft
CNC-ported 317 heads
Polished Manley Performance valves
Forged JE pistons and connecting rods
Cloyes timing chain kit
High-volume oil pump
Power is sent to the rear or all four wheels through a TH400 three-speed automatic transmission with an aluminum pan and a billet torque converter paired with a New Process transfer case and limited-slip differentials. The modified dual magnaflow and x-pipe exhaust system terminates above the rear axle, and additional photos of the underside are available in the gallery below.
ID# 176429Posted May 12
2014 Ford Raptor
This Truck has been in storage since it completion by RPG in 2017, No Desert time and less then 1000mi on suspension. Supercharger installed at 19000mi. Super Charger and Shocks removed from a rolled truck at 3000miles of use, all components were completely rebuilt and inspected by Fox and Whipple prior to reinstall on this Raptor.
No Sunroof, Ready to Cage.
Whipple Supercharger with oversized Intercooler and Trans Cooler
RPG Trophy Front Bumper with Baja Designs 50” and 40” onX6 Light bars
RPG Rear Bumper W/Backup Sensors and Baja Designs S2 Pro LED lights
RPG Bolt Kit Front Suspension
Fox 3.0 IBP Coilovers W/ DSC
Fox 3.0 Bypass 2 Tube with QAB (Black Powder Coated)
RCV +3” Front Axels
RPG Bolt Kit Tie Rod Kit
Baer 14” Rotor 6 Piston Caliper Front Brakes
RPG RST 18 Rear Suspension with Bed Cage, HF Jack and fuel Jugs.
Fox 3.5” x 16” 5 Tube with QAB (Black Powder Coated)
RPG Full Float Fabricated Rear Housing With Currie Hubs, GearWorks 3rd member, 4.56 gears, Wavetrack LSD Ford 9” With Steel Drive Shaft
Deaver +3 HD Leafs with RPG Shackles
Baer 14” 4 Piston Caliper Rear Brakes
6 BFG KR2 37/12.5 R17
6 Weld Forged Bead Lock Wheels 17”x 9” (2 Wheel Rings Scrached in Rollover)
VHF Radio in Center Console with 3rd brake light antenna mount (no antenna)
ID# 176273Posted May 06
2011 Ford F150
SOLD SOLD SOLD
2011 F150 2WD SCab with 6.5ft bed. The "Poverty Runner"
217,000 miles. Excellent daily driver/bro runner
Cold A/C, Power Windows, double din with Apple Car Play..
Truck was a former TX Parks and Rec vehicle. Always maintained
Raptor suspension and glass swap began at 205,000 miles
5.0 Coyote with AMRL tune. Engine is strong and healthy
Transmission freshened up with new valve body, lead frame and solenoids at 205k
New Driveshaft Specialties 2 piece drive shaft and U-Joints at 205k
New 2wd Hubs
Braided steel extended length brake lines F/R
Gen 1 Ford Raptor rear leaf springs
FOX 3.0 IBP shocks Gen 2 Raptor (non Live Valve
Raptor SVT Lower Control Arms
Tubular Uni-ball Upper Control Arm
KHC GEN 2 Shock bucket kit. Allows use of newer Gen 2 coil overs (stock or aftermarket)
FOX 3.0 IBP Gen 2 coil overs (non Live valve)
McNeil Racing Gen 2 fiberglass bedsides
McNiel Racing 1 piece 2018-2020 F150 Headlights (Pinned On)
5 Method Roost wheels
5 (new) 37x12.50/17 Pro Comp A/T Sport
4:88 Yukon gears in 9.75 rear end with Limited slip (installed 207k)
I have another project and need to make some room. The plan was to eventually cage and back half this truck, hence why the back is still on stock Raptor leafs etc.
Truck runs and drives great, is as capable as a stock Raptor minus 4x4, would make great jumping off point for someone else to finish.
ID# 177426Posted Jun 20
120 wheel base, va 2074 cc, 091 trans gears changed, fox shocks all corners + bypass on rear, two seater. Must sell die to health issues so it's best offer possibly or trade for street car
ID# 177424Posted Jun 20
1995 Ford Bronco
1995 Ford Bronco 5.8l with long travel and semi custom interior possibly with full floater
Engine- only has a bbk throttle body and k&n cold air intake and exhaust is cut off after cat was going to make a new exhaust but haven’t had time or money
Exterior- Solo motorsports bumper with hella lights and one knock off, 2 gg lighting pods hidden in grill with strobe white/ amber, method double standard wheels with 33” general grabbers
Interior- 2 corbeau leather bucket seats really comfy I have stock back bench but it’s been sitting outside custom center console with sidewinder shifter push button switches iPad set up not sure if iPad will be included custom tire carrier in the back for the spare and Meg quick release steering wheel with sparco steering wheel I did all the work not perfect but it works I didn’t have the right tools and didn’t have the skills I have now
Suspension-front- solo motorsports engine cage with c&t beams I built my own truss it’s pretty beefy it’s has 2.5x12” king coil overs with race finned resis and clickers I have one bump stop need one more to finish the front
Rear-desolate Motorsports rear upper shock mount with q80-2 reaver leaf springs (same as the normal q80 just a 2” lift instead of the 4” makes it more of a sleeper style)2.5x12” king triple bypass resis and 2x2 king bumps in solo bump mounts suspension was tuned at koh and it hauls ass now the rear wms is bent and I have a complete custom fabricated 9” on the way with Wilwood disc brakes full floater from Schreiner ent. Rear end will be 69”wms to wms
I don’t want to sell but I’d like to move out of my parents house and it’ll help out a lot plus I’d like to move onto something with 4 doors
27k obo without 9” will lower price or possibly would take some trades
For more pictures I have my Instagram open it’s @95_Bluwhale